Maintaining an electric bike is much easier than you think, and it all starts with the tires

Many people think that the maintenance of an electric bike is complicated, but in fact, as long as you master a few key points, you can keep your Lankeleisi electric bike in good performance for a long time. And the starting point of everything is the tire. The tire is the part of the electric bike that is in direct contact with the ground, and its condition directly affects the riding experience, endurance and safety. Therefore, regularly checking the tire pressure, wear and tread cleanliness is the first step in maintenance.

Several ways to maintain tires

Maintaining the right tire pressure

Too low tire pressure will increase rolling resistance, affect endurance, and even cause a blowout; too high pressure will affect grip. It is recommended to refer to the official recommended tire pressure value of Lankeleisi (usually marked on the side of the tire) and check it once a week.

Check tread wear

If you find that the tire pattern becomes lighter or cracks appear, it means that the tire has been severely worn and should be replaced in time to avoid slipping on wet roads.

Clean foreign objects on the tread

After riding, check whether the tire has been pierced by sharp objects such as stones and glass, and clean them in time to avoid long-term damage to the tire.

Adjust the hub bearing regularly

If you feel that the wheel is shaking or rotating poorly while riding, it may be that the bearing is loose or worn, and it needs to be adjusted or replaced in time.

The correct way to store electric bicycles

The storage method of electric bicycles directly affects its life, especially when it is not used for a long time, you should pay attention to the following points:

Avoid humid environment

Humidity can cause metal parts to rust and circuits to get damp. Try to store the ebike in a dry and ventilated place. If you can only park it outdoors, it is recommended to use a waterproof bicycles cover.

Maintain proper power

If it is not used for a long time, it is recommended to keep the battery power at 50%-70%, avoid full discharge or full storage to extend the battery life.

Start and check regularly

Even if you don't ride, you should start it every 2-3 weeks to check whether the brakes, lights, motors, etc. are normal to prevent aging of components.

Parking with a stand

When parking for a long time, it is best to use a stand to support the body to prevent the tire from being deformed on one side due to pressure.

Depending on each person's usage and maintenance habits, the degree of aging of electric bicycles will vary
The same Lankeleisi electric bicycle may age at a very different rate under different people's usage. The following are several key influencing factors:

Riding frequency:

High frequency and long distance riding will accelerate the wear of tires, brakes and motors, and more frequent maintenance is required.

Road conditions:

Vehicles that often ride on bumpy and muddy roads are more likely to have their suspension, chains and other parts damaged.

Charging habits:

Excessive discharge or frequent fast charging will shorten the battery life. It is recommended to charge as you use it to avoid charging when the battery is exhausted.

Regular maintenance:

Developing the habit of checking the brakes, chain lubrication, and screw tightness every month can significantly delay aging.

Conclusion

Maintaining an electric bicycle is not difficult. The key lies in regular inspection, correct use and scientific storage. As long as you follow the above methods to maintain your Lankeleisi electric bicycle, it will accompany you longer and the riding experience will be smoother and safer. What maintenance tips do you have? Feel free to share them in the comments section!